"Lil' Bastard" Mk1 Short Scale Children's/Travel Cigar Box Guitar

 

Here's one for the kids...or little folks...or travel...or open-tuned, pseudo-lap-steel-ish slide playing. 

This cute little Avo Uvezian box was the perfect match for this maple neck, pulled off of one of those weird guitars supposedly meant for children that come in a 19 & 3/4"-ish scale--you know, the ones that never play or intonate properly (super-short-scale guitars being so finicky about intonation and whatnot), and they usually end up being discarded or used as wall art. Not this one. 

Due to aforementioned tuning/intonation/scale issues that come with these "shawties", I have set this one up for mostly open-tuning (G), preferably with a bottleneck slide. 

In that sense, it works well and sounds KILLER thanks to a piezo disc paired unconventionally with a custom single-coil pickup made especially for us DIY cigar box guitar builders (the MGB "Five Dolla' Make it Holla' Pickup", if memory serves), each with their own independent volume control and a master tone control. 


I believe with the right gauge of strings, it could intonate a little better and make a great "high-tuned" guitar, or again, great as-is for a slide work out of the box (pardon the pun).

Location: W4WVK Studios

Comments

Post a Comment

Popular posts from this blog

"Brown Sugar" - Keith Richards (Micawber) Inspired CBG

Image
  After building this one, I no longer have much faith in claims of "tone woods", because this one NAILS the tone from The Rolling Stones' "Brown Sugar" and "Start Me Up"... I had an aging Telecaster neck pulled off an actual Tele, along with the bridge, control plate and enough other bits and pieces to put together a rough yet regal CBG that could pay tribute to arguably one of the (if not THE) most beloved Telecasters of all time. Of course, to be right, it HAD to have the all-maple neck and a PAF style humbucker in the neck position (flipped with the polepieces away from the neck). The middle control knob is for a hidden passive piezo "acoustic" pickup under the lid, and in addition to the 3-way switch you get a volume for the magnetic pickups and a master tone control. The deep box allowed me to use a "strat-style" jack (the "football" jack), and also was a good opportunity to use these heftier corner protectors too. I...
Read more

About Lane Cigar Box Guitars

Image
Introduction... Let's start out by acknowledging that I am not a "luthier". Those guys are trained, experienced and skilled at doing fine finish-work, building instruments from raw materials, and creating premium/boutique instruments for the most discerning players. Don't insult them by referring to me as a "luthier". I am more of a mad-scientist who takes a mix of raw materials, aftermarket parts, "pull-offs" (parts/components removed from decommissioned pre-existing instruments) and my "just knowledgeable enough to be dangerous" woodworking/finishing skills to take "upcycling" to the next level. I've been a "guitar tech" for almost as long as I've been a musician, and I implement some of my resourcefulness and know-how to make playable art. Cigar Box Guitars have been around in the USA since the 1800's, inspired by Celtic, African and other cultures' ingenuity to create instruments from a myriad of ma...
Read more

Thinking Outside the Box (Tips, Tricks and Hints) - Need a Basic DIY Tailpiece for your 6-string CBG? No Problemo!

Image
Recently I decided I was going to do my most "rustic" build yet. I wanted to use a pull-off neck from some thrift-shop score (a no-name Strat clone that I just bought for the neck and the pickups/wiring-harness, paying the princely sum of $30), but otherwise I was going to try to make a real "tool-shed special", even fabricating a bridge out of some kind of scrap wood or metal, and keeping the electronics simple (maybe just a pair of piezo discs and a single volume control). Bare-bones, bare-minimum but still with my "real 6-string guitar" methodology. I had it all more or less conceptualized in my brain, except I couldn't come up with an acceptable tailpiece/string-anchor. Argh!!! Then it hit me... What do you need for a tailpiece? Simple: a way to attach it to the body behind the bridge, and six holes or slots to hold the string-end "balls". Obviously the spacing matters (should be about 2" from high-E to low-E), but otherwise, you mig...
Read more